|
|
|
| Home > Products > Product Detail |
| |
| Key Specifications/Special Features: |
| |
Brief Description:
Super High Precision Refrigerating/Heating Circulator equipped with sensitive microprocessor-based PID controllers with 0.001°C precision and 0.005°C uniformity. Specially Designed for highest precise requirement from laboratories.
Features:
Highly accurate & High performance
Super high precise temperature control with 0.001°C precision and 0.005°C uniformity
Freon-free Refrigerating system, environmental friendly.
Low noise air cooled compressor with overheating and overload protection.
Power-off protection, automatically keep working for 3 minutes.
PID controller maximizes rapid heat-up and cool-down without temperature overshoot.
Proportional cooling control to ensure energy-saving performance and less heating emitted.
Fitted with a high efficiency stirrer motor to maintain the uniform temperature of high precision water bath.
The units are suitable for either open- or closed-loop circulation.
Easy-to-use, Safe & Durable
Over-temperature Protection
Large LCD display and Front-panel controls provide easy access and safer operation
The water bath tank is constructed of stainless steel and does not have seams that could leak
Easy-to-clean stainless steel tank
Provides a drain port for conveniently draining the bath fluid.
Robust, durable construction for longevity, reliability
Specifications:
| Model | Temp Range (°C) | Temp Uniformity (°C) | Temp Presion (°C) | Tank Dimension
(L× W×Depth) (mm) | Pump Flow (L/min) | Bath opening (mm) | Drain | | GDH-0506 | -5 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y | | GDH-1006 | -10 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y | | GDH-2006 | -20 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y | | GDH-3006 | -30 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y | | GDH-4006 | -40 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y | | GDH-0510 | -5 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 250× 200×200 | 6 | 180×140 | Y | | GDH-2010 | -20 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 250× 200×200 | 6 | 180×140 | Y | | GDH-3010 | -30 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 250× 200×200 | 6 | 180×140 | Y | | GDH-1015 | -10 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 280× 250×220 | 6 | 235×160 | Y | | GDH-2015 | -20 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 300× 250×200 | 6 | 235×160 | Y | | GDH-3015 | -30 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 300× 250×200 | 6 | 235×160 | Y | | GDH-1020 | -10 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 280× 250×280 | 6 | 235×160 | Y | | GDH-0530 | -5 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 400× 325×230 | 6 | 310×280 | Y | | GDH-1030 | -10 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 400× 325×230 | 13 | 310×280 | Y | | GDH-2030 | -20 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 400× 325×230 | 13 | 310×280 | Y | | GDH-3030 | -30 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 400× 325×230 | 13 | 310×280 | Y | | GDH-3005A | -30 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 250× 200×120 | 6 | 180×140 | Y | | GDH-2008W | -20 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 280× 250×140 | 6 | 235×160 | Y | | GDH-1015W | -10 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 280× 250×220 | 6 | 235×160 | Y | | GDH-3506W | -35 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y | | GDH-3510W | -35 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 250× 200×200 | 6 | 180×140 | Y | | GDH-0506W | -6 ~ 100 | ±0.005 ~ ±0.02 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y | | GDH-4006W | -40 ~ 100 | ±0.005 ~ ±0.05 | 0.01/0.001 | 250× 200×150 | 6 | 180×140 | Y |
|
|
